When to act
Signs you need faucet and sink repair
- Corrosion or staining around the base of the faucet
- A faucet drips when fully closed
- Low flow at one fixture only
- A leak underneath the sink cabinet
The job itself
How faucet and sink repair is done properly
Faucet & Sink Repair is handled by independent licensed plumbers in Texas. This page covers what the work involves, what changes the price, and the Texas code and permit rules that apply. Published ranges are on the separate faucet & sink costs page. Locally, the biggest markets for it are Houston, San Antonio, Dallas. Requests for it often arrive alongside leak detection & repair.
- The valve type is identified — cartridge, ball, ceramic disc or compression
- Water is isolated at the stops and the fixture disassembled
- Cartridge, seats, springs or O-rings are replaced, or the faucet is replaced
- Supply lines, stops and the P-trap assembly are inspected
- Flow and shut-off are tested at full pressure
Price drivers
What drives faucet & sink pricing in Texas
- 01
Repair of the existing valve versus full fixture replacement
- 02
Whether replacement parts are still available for the brand and model
- 03
Corroded or seized shut-off valves that must be replaced first
- 04
Number of holes in the deck and whether the new fixture matches
- 05
Access under the cabinet
Scope boundary
What a standard visit covers — and what is billed on top
The single biggest source of quote disputes is the boundary between these two columns. Get it written down before work starts.
| Normally included | Commonly billed on top |
|---|---|
| Inspecting the trap, tailpiece and shut-offs beneath the sink | Cutting new deck holes or adapting a mismatched hole configuration |
| Identifying the source of a drip, leak or weak flow | A new faucet or sink when parts for the model are discontinued |
| Rebuilding the valve with a new cartridge, seats, springs or O-rings | Replacing corroded angle stops or braided supply connectors |
Local pages
Faucet & Sink by city in Texas
Each city page adds local ZIP coverage, permit authority and routing detail.
-
Houston
Harris County
-
San Antonio
Bexar County
-
Dallas
Dallas County
-
Fort Worth
Tarrant County
-
Austin
Travis County
-
El Paso
El Paso County
-
Arlington
Tarrant County
-
Corpus Christi
Nueces County
-
Plano
Collin County
-
Laredo
Webb County
-
Lubbock
Lubbock County
-
Garland
Dallas County
Before you sign
Questions to ask before authorising faucet and sink repair
- 01
Does the visit also cover the P-trap, tailpiece and basket strainer, since leaks below the bowl are often mistaken for faucet drips?
- 02
Which valve type is fitted — cartridge, ball, ceramic disc or compression — and are matching parts still made for that model?
- 03
Is rebuilding the existing faucet sensible, or has the body and finish deteriorated enough that a replacement lasts longer?
- 04
Will the shut-off valves under the cabinet be tested first, because seized stops often force extra work before any repair?
Before anyone touches a pipe
Verify the licence. It takes two minutes.
- Who licenses the work: Texas State Board of Plumbing Examiners (TSBPE).
- Who pulls the permit: the licensed contractor, never the homeowner.
- What to ask for: the licence number, the registered name behind it, and an insurance certificate issued to the property address.
Answers first
Faucet & Sink in Texas — good questions
Is a dripping faucet actually worth fixing?
Yes — a steady drip wastes a meaningful volume over a year, and the same worn seat that drips is usually also scoring the valve body. Catching it early keeps it a cartridge replacement instead of a fixture replacement.
Why is water pressure low at only one faucet?
A single fixture usually means a clogged aerator or a partially closed or failing angle stop, not a house-wide pressure problem. Aerator cleaning is the first thing to rule out.
Can I supply my own faucet?
Many contractors will install an owner-supplied fixture but will not warrant the fixture itself. Ask how it affects the labour warranty before buying.
How should a faucet & sink quote be compared?
Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.
Who handles the permit for faucet & sink in Texas?
The licensed contractor pulls the permit — never the homeowner. If a contractor proposes skipping a required permit, treat that as the signal to stop and verify the licence.
What warranty applies to the work?
Whatever the contractor offers in writing — PlumberTexas is not a party to the agreement. Ask for labour and parts warranty terms in the quote, and keep the licence number with the paperwork.
How does the callback request work?
The 30-second form asks for a name, ZIP and the number to reach you on. The request routes to an independent licensed professional covering that area, and they call you back. Consent for marketing contact is optional — the request goes through with or without it.
Which areas does PlumberTexas cover?
All of Texas: the site lists every covered city with real ZIP codes, the county permit authority and nearby coverage, so requests route to a professional already working that area.
Get connected
Faucet & Sink in Texas
One short request is enough to reach an independent licensed plumber covering Texas. You keep control of scope, price and the decision to hire.
- Requests handled around the clock
- An independent licensed pro calls you back
- No obligation to hire
Prefer a call back?
Half a minute of typing; the callback comes from an independent licensed pro.
Request received
It has been routed to an independent licensed professional covering your area — they will call you back on the number you entered.
Keep reading
Related reading
-
Cost guide
Faucet & Sink cost ranges in Texas
-
Services
All plumbing services
-
Licensing
Texas licensing and permits