Boiler & Radiant Heat in Houston, Texas

Knocking usually means trapped air, water hammer from a stuck valve, or in steam systems a pitch problem letting condensate collect. Bleeding is the first step; persistent knocking is a diagnostic visit.

Most residential hydronic systems sit in a low static band when cold and rise modestly when hot — check the manufacturer's plate for your unit. Pressure that keeps climbing usually points to a failed expansion tank or a leaking fill valve.

It varies by state and by the credential involved. Hydronic and steam boilers are commonly plumbing-licensed work; forced-air is HVAC. Confirm the contractor holds the right credential for boiler work in your state.

Permits in Houston are issued by Houston Public Works - Code Enforcement (Houston Permitting Center). As a rule, water heater replacement, gas work, sewer laterals and repiping are permitted work, while a like-for-like faucet or disposal swap usually is not. A licensed contractor pulls the permit — if one offers to skip it, that is the signal to stop.

Requests route around the clock, but most contractors price after-hours work differently. Ask for the after-hours rate and a committed arrival window before agreeing to a dispatch.

Three things: where the water or problem is showing, whether the supply is shut off, and the property type — slab, crawl space or basement. With those, a pro covering Houston can triage the urgency and bring the right parts.

Line by line against scope: what is included, what is excluded, who pulls the permit, and whether haul-away and restoration are inside the number. The cost guides on this site list published third-party ranges so any quote can be sanity-checked.

The licensed contractor pulls the permit — never the homeowner. If a contractor proposes skipping a required permit, treat that as the signal to stop and verify the licence.